Summer Starts Here - Save up to 70%
Tekonsha T-One Vehicle Wiring Harness Installation - 2011 Nissan Versa- Video
Today on our 2011 Nissan Versa we're going to be taking a look at and showing you how to install the Tekonsha T-One Vehicle Wiring Harness with the 4-Pole Flat Trailer Connector.Here's what our wire's going to look like once we have it installed. It is going to provide us with a four-pole flat trailer connector so we have all the lights to safely get down the road, like our taillights, turn signals, and our brake lights. Now, whenever we're not using our wiring, it is designed to stay on the inside of the car at all times so we can just bundle it up and keep it wrapped inside by our spare tire. When we do want to use it, we'll pull out the slack, drop it down by our hitch. So long as we stay away from the actual latch mechanism, the wire will have enough cushion on the weather stripping here where it won't get damaged.Now, the nice thing about our wiring is that it is going to be custom designed for our Nissan. We're not going to have to cut or splice into any of the factory wires. more
2/20/2019 1:37:13 PM
Trailer Wiring Harness Installation - 2010 Nissan Versa- Video
Today on our 2010 Nissan Versa, well be installing the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 118545. Now when youre going to use your four-flat wiring, youll simply pull it out, keep it away from the center latch area. When you close the hatch, itll push in on the weather stripping. When you no longer need the four-flat wiring, you simply raise the hatch and lift up the rear storage area. You can store your four-flat wiring down near the spare tire.Were going to begin here by raising the rear hatch of the vehicle. Well then need to remove the center covering section here, as well as this section right here. more
12/18/2014 6:52:18 PM
Filter Videos
Filter Videos
